Skip to main content
Electrolux | Help and Support

Washer - dryer’s inlet hose is leaking

  1. Last updated
  2. Save as PDF

 

If the inlet hose is leaking, please refer to the suggestions below.

PSGBFL140G002061.jpg

To solve this problem, you should check the following:

  • Inspect the inlet pipe adapter on the wall or water tap.
  • Check if the pipe connection is screwed on and tightened properly.
  • Check if there is no leak coming from the tap.
  • If you discover that the tap is leaking, you should call a plumber to get the problem fixed.

Warning: Do not use pliers or any other similar tool to tighten the pipe connection. It should be tightened only by hand!
PSGBFL140G002060.jpg
  • Check the water supply connection to the inlet of the machine.
  • The connection should be screwed on and tightened properly.

Warning: Do not use pliers or any other similar tool to tighten the pipe connection. It should be tightened only by hand!

IMPORTANT: 

  • If the hose is damaged (separated or cracked), disconnect the water supply to the machine and contact Authorized Service Center.
  • If the appliance is still under warranty, we will send you a new spare part free of charge and you can replace it yourself.

If the appliance is under warranty, we will send you a new spare part at no charge, which you can replace by yourself. Please contact an Authorized Service Center. 

You can contact an Authorized Service Center by clicking on the link below.