Skip to main content
Electrolux | Help and Support

Hob displays error message F

 

 

If the Hob displays error message F, refer to the suggestions below for step by step instructions.

The message shows continuously: 

Possible cause:

  • Connection error or phase connection is missing.
  • The cooker hot plate must be connected by an Authorized Service Center in 2 or 3 separate phases.
The message shows as a flashing symbol:

Possible cause:

  • Problem related to the registration of the saucepan.
  • The saucepan must have specific material characteristics, a minimum diameter and thickness per cooking zone. Refer to the user manual. 

To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.

When contacting us, please have the following information to hand. You will find this information on the manufacturer’s data plate:

  1. Model number
  2. Product number (PNC)
  3. ELC number
  4. Serial number

Data plate with model number, product number/PNC, ELC and serial number:

modelnoexplanation1.gif
  1. Model number
  2. Product number (PNC)
  3. ELC number
  4. Serial number

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.

  • Was this article helpful?