Skip to main content
Electrolux | Help and Support

error codes


Problem Error code Cause Solution
The display is blank.   The battery is empty Charge the battery.
The robot does not start   The Dust container is not present or properly closed. Place the Dust container in the robot, properly close the lid.
    The robot is lifted Place the robot on the floor before starting.
The robot does not move/clean properly E:10 The bumper is stuck Please make sure the bumper can move properly and remove any debris that might block it.
  E:11 Right wheel is stuck Check that all parts turn freely. Clean and remove entangled threads from parts if needed. Replace Brush roll or Side brush if damaged


  • Was this article helpful?