Skip to main content
Electrolux | Help and Support

Dishwasher is not heating up water

 
Issue
  • Dishwasher is not heating up water.
Applies to
  • integrated dishwasher
  • freestanding dishwasher
Resolution

1. Reset your appliance

  • Remove the plug for the dishwasher, wait 1 minute and plug it back in.
  • You can also turn off the power using the fuses on the panel/power switch.
  • If you have pulled the machine out and then pushed it back into position, it is important to ensure that no tubing is kinked or crushed and that the tap is fully open.
  • Turn on the dishwasher, select a suitable cycle and start it.
  • If the cycle starts and operates normally, the problem has been resolved.

2. Start an intensive cycle and check if the machine is warm inside when the cycle ends. 

3. Contact an Authorized Service Centre

If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.

 

NOTE: Depending on the problem, you may be charged for a service visit by an engineer, even during the warranty period.

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.